Product Details:
Minimum Order Quantity | 1 Piece |
Weight | 3 kg |
Frequency | 50-60 Hz |
Air Volume | 45~110CFM |
Operating Voltage | 110V - 220 V |
Operating Temperature | 0~50 Degree C |
Air Coverage | 40cm x 60cm |
Size | 90mm(L)x260mm(H)x170mm(W) |
Testing Voltage | 1kV to 100V |
ESD Bench top ionizing Air Blower
Product Description
Model: SL-001
Operating Voltage 110V/60Hz or 220V/50Hz
Current Consumption 0.25A or 0.12A
Operating Temperature 0 ~50°c
Air Coverage 40cm x 60cm
Size 90mm(L)x260mm(H)x170mm(W)
Weight 3kg
Air Volume 45~110CFM
Testing Condition:
Operating Voltage: 110V/220V,
Testing Voltage: 1kV to 100V,
Temperature: 22°C
Distance | 300mm | 600mm | 900mm | |
Decay Time | positive | 1.2s | 2.4s | 4.0s |
negative | 1.2s | 2.5s | 3.9s | |
Offset Voltage | positive | 8v | 5v | 4v |
negative | 7v | 6v | 3v |
Features:
Ionizing air blower is a static elimination device which delivers a balanced ion stream to neutralize wide, focused areas.
They remove contaminants attraction and neutralize static charges from wide, focused, or hard-to-reach areas so as to increase productivity In manufacturing.
They are ideally used in industrial environments such as delicate electronic products, electronic assembly line, medical device manufacturing and assembly lines, printing, packaging, and small part injection molding etc.
Ion balance voltage is ≤ +/-10V.
Note : Prices of Products are approximate and will vary according to Buyer Requirement.
Product Details:
Minimum Order Quantity | 1 Unit |
Voltage | 110V - 220V |
Power | 200W |
Dimensions | 420x245x400 mm |
Filters Quantity | 1pcs, 5pcs |
Systemic Flow | 2 x 150m3/h |
Filtering Efficiency | 0.1micron 99.999% |
Length of Duct | Dia 75mm or 50mm |
Noise | Less than 60dB |
Net weight | 13kgs |
Specifications:
Model Number: | F6002 |
Filters Quantity: | pre-filter 5pcs, middle filter 1pc, main filter 1pcs |
Voltage/Power: | 110-220V, 200W |
Systemic Flow: | 2 x 150m3/h |
Filtering Efficiency: | 0.1micron 99.999% |
Length of Duct: | Dia.75mm or 50mm |
Noise: | Less than 60dB |
Dimensions(mm) | 420x245x400 |
Net weight | 13kgs |
Description:
Fume Purifying and Filtering System is for cleaning of both particles and gases. It is designed to filter the harmfu substances, such as hydrocarbon and cyanide, during the process of soldering, tin dipping in the solder pot, laser marking and carving, printing, etc. It catches harmful smoke with freestanding ducts and adjustabl air volume to significantly improve your working environment.
It has a triple-filter system:
1) Pre-Filter: the large-size pad filter can filter large particles of dust
2) Middle Filter: it filters the bigger powders for prolonging the main filter's life.
3) Main Filter: it includes HEPA (high efficiency) filter and gas filter. The HEPA cleans the gas and powders filtering from the pre-filter and then carry them to the gas filter. which with the carbon and other chemical combination, filters off the deleterious substance and then outputs the clean air.
Features:
- It realizes powerful suction with quiet operation;
- Brushless motor ensures low noise, stable performance, and long product life;
- Triple-filter design. Pre-filters and Main Filters can be replaced separately for prolonging the filter‘ s life time and cutting down the cost:
- Built-in air cycling filtering system avoids discharging the cool/hot air to outside;
- It is easy to install and no need to lay pipelines;
- The airflow is freely adjustable according to working environments;
- Freestanding flexible ducts facilitate production changeovers;
- Ducts can be bent or lengthened as desired and maintain their shape after adjustment, letting you place them exactly where suction is needed.
Note : Prices of Products are approximate and will vary according to Buyer Requirement.